Friday, December 4, 2015

DECEMBER 4, 2015

- Reversing Animation with the scale keys tool, which for the most part I knew how to do, however this helped in showing different places you can do this from (while previously I'd only ever done it from the graph editor).

-While I knew how to break tangents, this tutorial helped me understand what exactly each tangent did to the animation, along with how to play with the curve so that the animation is much smoother and more realistic. Delano also mentioned that this helps with weight, and I can understand how this method would accomplish that.

-while I have also used weighted tangents before, I didn't realize you could completely change the timing of an animation without adding extra keys. It would have certainly saved me a lot of time in the past and will hopefully save me more time in the future.

-I had baked animation a while back, however I had almost completely forgotten how. It was useful however on my animation using soft and rigid bodies, where I baked the animation so that it would stay.

-Simplify curves is rather easy, but finding a good value is a little difficult. I still believe it will help with very specific animations that need a lower key count. It seems like something I'll use quite a bit.

-Modifying a group of keyframes efficiently in the graph editor was always difficult for me. This tutorial showed me how to use the regional tool (which was the most helpful to me) to select a certain area of keyframes rather than having to go in and select them one at a time or use the rather random marquee tool.

Thursday, December 3, 2015

DECEMBER 3RD 2015 JOURNAL

Today I went through more of the Animation Ask DTs in Maya, and went over

-Jiggle physics, which was a lot simpler than I thought. This includes both the attributes you can edit and the painting of the jiggle

-make sure the simplify curves operation works, which is about as it sounds. It helps teach it what keys to remove and how many keys to remove within them. To fix the operation changing the operation, we can bump up the tolerance.

-deforming objects along closed paths, which was still rather simple, however will help very much when animating so that we do not have to animate them on our own. Using flowpath objects would be something I may research more in the future, as it seems it could be useful for effects other than just the one seen here, for instance a snake slithering down a path.

-how to control the jiggle deformer on objects. It's the same tutorial. They put it on the website twice. How could they.

Then went through animation tips in Maya and went over

-setting and preferences. I learned how to change the frame rate to however we like without affecting the animation speed. It's as simple as a check box (which I didn't realize). It showed me a lot of what I knew, but also a lot that I didn't. Autokey I knew how to use and how it worked, however it did teach me a lot about rotation interpolation and tangents, which I didn't even know you could change before. I also knew about references, however it helped key on referenced objects, which is incredibly useful for the type of referenced animation I've been forced to do. There was also a lot more about the time slider I didn't realize.

-i know about the time slider ok

Wednesday, December 2, 2015

DECEMBER 2 JOURNAL

Today I-

- Made an emitter follow a path in Maya, which I was surprised to find I could figure it out on my own. It was a lot easier than I thought it would be and playing with the controls allowed for some very cool effects.

-Learned how to switch between animations with a motion path in Maya. This one was a bit complex, and had me brain-boggled as I struggled to figure out why mine wasn't working. Eventually I did realize my err, however not after quite a while.

-Learned to unparent during animation in Maya. While this is technically review, I had long forgotten how to do this and this animation helped remind me as to how; that is changing the attribute in the editor and keying it when necessary.

-learned to overwrite keyframes in the time slider, however it was a skill I already had and was using.*

-learned to animate extrusion along a path. Alongside this new path, I was reminded how to extrude off of a curve. One of my main issues was that the extrude I had to use was different from the one used in the video. Well, in a different location at the least.

-how to make a large object disappear into a smaller one, which could be used for portals and more.

- how to animate tree growth with paint effects. This would've helped thoroughly with our practice animation for skills, so I'm glad I know how to do it now. Plus, it's much easier than what I was considering doing for our animation.

-how to flip an animation. This was dirt simple. Not really much to say.

-





















*from here to lesson 16, there were no project files.

Tuesday, December 1, 2015

Exnite House Render and Textures






These are renders for an Indie FPS I'm making models for called "Exnite." I took some preexisting textures and added in an age using photoshop to make the house look older to fit the aesthetic of the game.

December 1

Today I worked on finishing a building for Exnite as I watched through the animation tips in maya. I learned how to mirror and operation, manipulate curves, how to move objects in a radial manner. It's peculiar to me what exactly the point of learning the radial movement would be, but then the tutorial man explained how it could be used without having to move the objects over and over again. It created a really nice effect that could be used for many type of animations.

Thursday, November 19, 2015

New and Improved



I have improved a lot of things for this video- which should be rather clear just by watching them. I changed the road and the sky textures to be more cartoon-like to fit the overall style of the animation. I also gave the background people faces and better movement. Afterwards, I added extra animations into the characters. I made the main characters heads bob and their arms move back and forward as they walk down the path. I also added the word "Fin" at the end of the clip rather than "End," as I thought it would add more humor to the entire animation. Other than that, it was miner tweaks to camera angle and textures, fixing many of my main problems with the animation. Overall, I am very happy with the improvement I have made in the time period I did.

Monday, October 26, 2015

Models (Technique)


For the modeling of the skeleton, I partially used the storyboard, and partially based his model off of other pop-culture skeletons such as Skeletor from He-Man and the Masters of the Universe, and Jack Skellington from The Nightmare Before Christmas. Overall I had to make him roughly the same size and shape of the original character model, which was the most difficult part, as my mind pictured him as something different completely. However, I am pleased with the final product.

This character model is highly inspired by Rayman from the Rayman series of games, and I used a vertex modeling technique to shape him to the correct shape. I feel he well represents his concept drawing from the storyboard.


This was just drawn from the storyboard as a stereotypical person shape. It's dirt simple.


I based the truck model off of several images of semi trucks, and somewhat mixed in a moving van style into the back of it. I wanted it to look massive- tall and long, so that it would linger on screen and cause the gravity of what just hit the character be fully understood to the audience.

Wednesday, October 7, 2015

DAY 1 of Lighting

Today was a rough one- I got halfway into the first video before realizing that the computer would not render mental ray, and that I had to move. I then moved to another computer to realize I couldn't open anything, I had my flash drive hidden by Josh, and finally moved to a computer that couldn't open Maya before finding one that would actually work. This entire process took the entirety of 6th period.

After those obstructions I turned on physical sun lighting for the scene and then activated the final gather. I changed the setting a bit just to help soften out the image completely. I then added in the lens shader, because unlike it was supposed to, it did not automatically connect the camera to it. I could not find a way to activate color management, nor could I find a tutorial online on how.

Monday, October 5, 2015

Camera Shots

AERIEL SHOT

This shot is used from far away and high up, usually used to establish a scene and give the observer a sense of location.

ARC SHOT

The camera circles the subject, whether it be a character or an object.

BRIDGING SHOT

Denotes a time or place, such as the airplane scenes from Indiana Jones.

CLOSE UP

A shot that focuses on the face only; keeps only the face in frame.

MEDIUM SHOT

The most common framing in movies, shows from about the knees or thighs up to the top of the head.

LONG SHOT

Frames entire character or object from head to foot. Usually shorter than the wide shot.

COWBOY SHOT

Shot from behind, and from the waist up. Used commonly in westerns and the like.

DEEP FOCUS

A shot that keeps the entire frame in sharp focus (background, middle ground, and foreground).

DOLLY ZOOM

An effect used to create a vertigo-esque effect by zooming out while moving toward a subject, creating a woozy effect.

DUTCH TILT

A shot in which the camera is at an angle to express disorientation or confusion.

ESTABLISHING SHOT

Used to establish the scene or locale that the action is set in. Often at the beginning of the entire episode, movie, etc. Also often follows the aerial shot.

HANDHELD SHOT

Shot where the camera operator holds the camera while motion occurs to create a jerky and shaky feel. Often used in a first person perspective.

LOW ANGLE SHOT

A shot from low on the ground looking up at the focus, often used to portray power or dominance. Also good for making cities look empty. Apparently.

HIGH ANGLE SHOT

A shot looking from high up down upon a character or subject, used for isolation or fear.

LOCKED-DOWN SHOT

A shot where the camera is fixed while the action continues off-screen.

LIBRARY SHOT

A pre-existing shot of a location pulled from a library. A stock shot, if you will.

MATTE SHOT

A shot that incorporates foreground action with the background. Previously painted onto glass, now made in a computer.

MONEY SHOT

An expensive shot to shoot but worth it for its "wow" potential. Can usually only be done once.

OVER-THE-SHOULDER SHOT

Believe it or not, it's a shot shot from one's shoulder, typically used in conversation and implies a connection between the conversationalists.

PAN

A shot where the camera moves continuously right to left or left to right.

POV SHOT

A shot from the POV of a character so we may see through their eyes.

THE SEQUENCE SHOT

A long shot that covers an entire scene in one swoop without any cuts or editing.

STEADICAM SHOT

A shot from a hydraulically balanced camera that lets motion be smooth, fluid movement invented in the 70s.

TILT

A shot where the camera moves continuously up to down or down to up. Basically a panning shot rotated on its side. Actually, exactly like that. I really don't understand why they don't just call it a panning shot. It's stupid.

TOP SHOT

A shot looking at a scene at a 90 degree angle rather than at any other angle.

TRACKING SHOT

A shot that perfectly follows a subject from the side or behind or in front of the subject and not as clumsy or random as a panning shot.

TWO-SHOT

You'll never guess what this involves- two people in a medium shot. WOW! Who would've guessed?

WHIP PAN

A shot that pans but is so fast that the picture blurs beyond any sort of recognition. Used well for running or for transitions. Or if you just don't want your audience to know what's going on.

ZOOM

A shot using a lens that allows the cinematographer to change the distance between camera and object without physically moving the camera.

CRANE SHOT

This one is a bit hard to believe- it's a shot where you use a crane and moved up and down. It's like a vertical tracking shot. Often used to exemplify character lonliness


Michael Pampell QuickStart Vol. 3 Project


Friday, September 25, 2015

 The process of this model was a bit difficult. The main issue was connecting the arms and legs in a fashion that I wanted- they always warped or bridge in a way that looked awful and didn't line up well with the concept art. Eventually, working with both vertex and edge loop modeling, I had it perfectly matched up with my concept. The rigging was odd, considering my character wasn't in the shape of a normal human character. The weight painting was all over and adjusting the falloff didn't seem to change much. While the weight painting was a pain (and at first I didn't entirely grasp the concept), I eventually got his arms and legs to work the way they did. I didn't add a knee joint or IK handle for the leg as I wanted his walking to look rather stiff, like a toy or robot.

My first mistake was not looking up a natural walk cycle, and instead trying to create it on my own. The result was a clunky, graceless walk that made it look like he was moonwalking (and doing a terrible job at it, at any rate). When setting to redo it, I realized that part of my rig had broken off, which was a bit annoying, however eventually I managed to have him walk naturally. The main problem I had with the end result was having his little "bobble" when he reaches the top of his walk- trying to have him hang for just the right time to give him a realistic balance. That, and occasionally the IK handles would occasionally not work as they worked like they were supposed to, however that was soon remedied.

Monday, August 31, 2015

Quick Start to Maya Volume 2

For this project I used the 12 principles of animation (and some learning from the tutorials about drawback) to help improve my previous animation. I made the jump have a bit more air time using the graph editor (while, as simple as it was, was the hardest part for me). I very much enjoyed working with the curves while in the graph editor and being able to change things just by adjusting a few lines. Probably the easiest part was the jump itself, using squash and stretch to make it look more realistic. My main concerns about the animation may be the timing at the end, however I'm not entirely sure how to correct it.

Thursday, August 27, 2015

SQUASH AND STRETCH
Squash and stretch is squashing and stretching an object to exaggerate its movements and to give it weight. Whenever the weight is at the bottom of the character, it needs to be squashed. Whenever it is at the top or middle of an object/character, it should be stretched.

ANTICIPATION
Anticipation is used to prepare the audience for an action by a character, sometimes only to have the rug pulled out from under them. This can be used to build suspense and more understanding of the action in the scene.

STAGING

Staging is the way the scene is set up, from the landforms to the characters, and perhaps most importantly, the lighting in the scene. This can affect the way the scene goes and make it look more realistic.

STRAIGHT AHEAD ACTION AND POSE-TO-POSE

These are two completely different things- straight ahead is drawing the scene frame by frame from beginning to end, and Pose to Pose is starting with a few main key frames and filling in the rest later.
FOLLOW THROUGH AND OVERLAPPING ACTION
Follow through makes actions look more natural, as objects don't stop moving once they reach a certain point; they go forward and then backwards slightly. Overlapping action is where one action leads into another, and so on (ie one character shooting another in the face and he goes flying back.
SLOW IN AND SLOW OUT

Slow in and slow out is the natural progression of moving in objects, reaching the peak of its speed in the middle.

ARC

Almost everything in the natural world has an arc, and do not move in straight lines, so in animation it is important your movement includes arcs.

SECONDARY ACTION

This is an action taking place at the same time as a main action in an animation, and adds both life and realism to it.

TIMING

Timing refers to how many frames an action takes, and comparing that to real time. If the action is too fast or too slow, it will look unnatural.

EXAGGERATION

Exaggeration means simply that- exaggerating the characters movements and actions so that the audience can better their understanding of it and to make it more appealing to the eye.

SOLID DRAWING

Means giving drawings both volume and weight to maintain, not shrinking or growing at random.

APPEAL


Appeal is the overall look of the animation- is it aesthetically pleasing to look at?

Wednesday, August 26, 2015

Turret





For this first animation project, I thought I'd like to make it as cute as possible. I thought the jump may make it look a bit like a cute animal or a small child, and remind the viewer of one of their pets. Most likely one of the hardest parts was doing the reactions to each keyframe, AKA making the barrel move back a little whenever it swung forward. My main problem was that I didn't know how much to move it in recoil afterwards- I'd either do it too much or too little. Eventually, I got used to it,  and since the rig was easy to work with, I feel I made a fairly satisfying animation. If I could do anything to make it better, I would make it walk, but that proved too difficult for me to do.

Tuesday, August 25, 2015

Why I wish to be in animations

As a child, animated movies always fascinated me, particularly the 3D ones. I didn't quite understand how someone could make something out of nothing, and make something very real from a fake world. Nowadays, animation is a way I find to release my creativity in ways that are fun to me. Animation is just so expansive and there are so many things I can do with it. I also enjoy just being in this class, as I enjoy both the people and the teacher alike.