Thursday, December 10, 2015
Friday, December 4, 2015
DECEMBER 4, 2015
- Reversing Animation with the scale keys tool, which for the most part I knew how to do, however this helped in showing different places you can do this from (while previously I'd only ever done it from the graph editor).
-While I knew how to break tangents, this tutorial helped me understand what exactly each tangent did to the animation, along with how to play with the curve so that the animation is much smoother and more realistic. Delano also mentioned that this helps with weight, and I can understand how this method would accomplish that.
-while I have also used weighted tangents before, I didn't realize you could completely change the timing of an animation without adding extra keys. It would have certainly saved me a lot of time in the past and will hopefully save me more time in the future.
-I had baked animation a while back, however I had almost completely forgotten how. It was useful however on my animation using soft and rigid bodies, where I baked the animation so that it would stay.
-Simplify curves is rather easy, but finding a good value is a little difficult. I still believe it will help with very specific animations that need a lower key count. It seems like something I'll use quite a bit.
-Modifying a group of keyframes efficiently in the graph editor was always difficult for me. This tutorial showed me how to use the regional tool (which was the most helpful to me) to select a certain area of keyframes rather than having to go in and select them one at a time or use the rather random marquee tool.
-While I knew how to break tangents, this tutorial helped me understand what exactly each tangent did to the animation, along with how to play with the curve so that the animation is much smoother and more realistic. Delano also mentioned that this helps with weight, and I can understand how this method would accomplish that.
-while I have also used weighted tangents before, I didn't realize you could completely change the timing of an animation without adding extra keys. It would have certainly saved me a lot of time in the past and will hopefully save me more time in the future.
-I had baked animation a while back, however I had almost completely forgotten how. It was useful however on my animation using soft and rigid bodies, where I baked the animation so that it would stay.
-Simplify curves is rather easy, but finding a good value is a little difficult. I still believe it will help with very specific animations that need a lower key count. It seems like something I'll use quite a bit.
-Modifying a group of keyframes efficiently in the graph editor was always difficult for me. This tutorial showed me how to use the regional tool (which was the most helpful to me) to select a certain area of keyframes rather than having to go in and select them one at a time or use the rather random marquee tool.
Thursday, December 3, 2015
DECEMBER 3RD 2015 JOURNAL
Today I went through more of the Animation Ask DTs in Maya, and went over
-Jiggle physics, which was a lot simpler than I thought. This includes both the attributes you can edit and the painting of the jiggle
-make sure the simplify curves operation works, which is about as it sounds. It helps teach it what keys to remove and how many keys to remove within them. To fix the operation changing the operation, we can bump up the tolerance.
-deforming objects along closed paths, which was still rather simple, however will help very much when animating so that we do not have to animate them on our own. Using flowpath objects would be something I may research more in the future, as it seems it could be useful for effects other than just the one seen here, for instance a snake slithering down a path.
-how to control the jiggle deformer on objects. It's the same tutorial. They put it on the website twice. How could they.
Then went through animation tips in Maya and went over
-setting and preferences. I learned how to change the frame rate to however we like without affecting the animation speed. It's as simple as a check box (which I didn't realize). It showed me a lot of what I knew, but also a lot that I didn't. Autokey I knew how to use and how it worked, however it did teach me a lot about rotation interpolation and tangents, which I didn't even know you could change before. I also knew about references, however it helped key on referenced objects, which is incredibly useful for the type of referenced animation I've been forced to do. There was also a lot more about the time slider I didn't realize.
-i know about the time slider ok
-Jiggle physics, which was a lot simpler than I thought. This includes both the attributes you can edit and the painting of the jiggle
-make sure the simplify curves operation works, which is about as it sounds. It helps teach it what keys to remove and how many keys to remove within them. To fix the operation changing the operation, we can bump up the tolerance.
-deforming objects along closed paths, which was still rather simple, however will help very much when animating so that we do not have to animate them on our own. Using flowpath objects would be something I may research more in the future, as it seems it could be useful for effects other than just the one seen here, for instance a snake slithering down a path.
-how to control the jiggle deformer on objects. It's the same tutorial. They put it on the website twice. How could they.
Then went through animation tips in Maya and went over
-setting and preferences. I learned how to change the frame rate to however we like without affecting the animation speed. It's as simple as a check box (which I didn't realize). It showed me a lot of what I knew, but also a lot that I didn't. Autokey I knew how to use and how it worked, however it did teach me a lot about rotation interpolation and tangents, which I didn't even know you could change before. I also knew about references, however it helped key on referenced objects, which is incredibly useful for the type of referenced animation I've been forced to do. There was also a lot more about the time slider I didn't realize.
-i know about the time slider ok
Wednesday, December 2, 2015
DECEMBER 2 JOURNAL
Today I-
- Made an emitter follow a path in Maya, which I was surprised to find I could figure it out on my own. It was a lot easier than I thought it would be and playing with the controls allowed for some very cool effects.
-Learned how to switch between animations with a motion path in Maya. This one was a bit complex, and had me brain-boggled as I struggled to figure out why mine wasn't working. Eventually I did realize my err, however not after quite a while.
-Learned to unparent during animation in Maya. While this is technically review, I had long forgotten how to do this and this animation helped remind me as to how; that is changing the attribute in the editor and keying it when necessary.
-learned to overwrite keyframes in the time slider, however it was a skill I already had and was using.*
-learned to animate extrusion along a path. Alongside this new path, I was reminded how to extrude off of a curve. One of my main issues was that the extrude I had to use was different from the one used in the video. Well, in a different location at the least.
-how to make a large object disappear into a smaller one, which could be used for portals and more.
- how to animate tree growth with paint effects. This would've helped thoroughly with our practice animation for skills, so I'm glad I know how to do it now. Plus, it's much easier than what I was considering doing for our animation.
-how to flip an animation. This was dirt simple. Not really much to say.
-
*from here to lesson 16, there were no project files.
- Made an emitter follow a path in Maya, which I was surprised to find I could figure it out on my own. It was a lot easier than I thought it would be and playing with the controls allowed for some very cool effects.
-Learned how to switch between animations with a motion path in Maya. This one was a bit complex, and had me brain-boggled as I struggled to figure out why mine wasn't working. Eventually I did realize my err, however not after quite a while.
-Learned to unparent during animation in Maya. While this is technically review, I had long forgotten how to do this and this animation helped remind me as to how; that is changing the attribute in the editor and keying it when necessary.
-learned to overwrite keyframes in the time slider, however it was a skill I already had and was using.*
-learned to animate extrusion along a path. Alongside this new path, I was reminded how to extrude off of a curve. One of my main issues was that the extrude I had to use was different from the one used in the video. Well, in a different location at the least.
-how to make a large object disappear into a smaller one, which could be used for portals and more.
- how to animate tree growth with paint effects. This would've helped thoroughly with our practice animation for skills, so I'm glad I know how to do it now. Plus, it's much easier than what I was considering doing for our animation.
-how to flip an animation. This was dirt simple. Not really much to say.
-
*from here to lesson 16, there were no project files.
Tuesday, December 1, 2015
Exnite House Render and Textures
December 1
Today I worked on finishing a building for Exnite as I watched through the animation tips in maya. I learned how to mirror and operation, manipulate curves, how to move objects in a radial manner. It's peculiar to me what exactly the point of learning the radial movement would be, but then the tutorial man explained how it could be used without having to move the objects over and over again. It created a really nice effect that could be used for many type of animations.
Subscribe to:
Posts (Atom)






